This "turn key system" is sized for the needs of the average to larger households and small to medium sized commercial applications. Mounted on a stainless steel panel. Complete with Pre filters, electronics and UV generator.
This system is easily installed at the "point of entry" (POE). It will purify the water from most contaminants such as sediments, rust and pesticides with filtration down to 5 microns. Carbon filtration reduces taste and odor, including sulphur smell and chlorine residuals. Harmfull microorganisms such as viruses, bacteria and protozoa are killed with a powerfull UV disinfection dose that will inactivate the pathogens.
Safety
The MD1004 comes equipped with a UV monitor to monitor the UV light intensity in real time. A solenoid valve shuts off the flow of water should the monitor detects inadequate UV power.
This water purification system offers very efficient water treatment at a low cost per unit volume. The system is designed for ease of installation and is fully tested prior to shipment.
Rated flow
45 litres per minute, 2700 litres per hour, 64800 litres per day
Initial UV dose
54 mJ / cm²
Electrical
100 - 130 V AC 50 - 60 Hz,
220 - 240 V AC 50 - 60 Hz
Size and weight
38 x 45 x 7,5 in. 95 lbs / 43 Kg
Maximum operating temp.
37º celsius (98,6ºF)
Maximum operating press.
8,6 Bar (tested to 35 Bar) 125 psi (tested to 500 psi)
Plumbing
1" MNPT In/Out
Chamber material
304L stainless steel (316L SS available)
Filtration
5 micron sediment filter, GAC filter, 5 micron Carbon block filter
Power usage
100 W
Additional features Electronic deposit control
